2020 Product Launch Overview | SECO TOOLS

2020 Product Launch Overview | SECO TOOLS

Hi everyone, my name is Tim Aydt, product manager at Seco Tools in North America, and today I’m going to talk about new products coming out for the 2020.1 product release from Seco Tools. You will see several new products and innovations sure to help you in your manufacturing processes. One of the new products…

Lean Machine | Metal and Carbon Fiber 3D Printing for Job Shops

Lean Machine | Metal and Carbon Fiber 3D Printing for Job Shops

One of the big challenges we had with the bending cell was to basically design and integrate everything in a really timely fashion. We were able to actually do it in about six months and that would not have been possible without the additive We found Markforged by researching for the best printers out there…

1940s Metal Lathe [Restoration]

1940s Metal Lathe [Restoration]

There is no room on the other side of the pin to punch it out These will need to be fixed Surprise! This is locked in…for now This needs replacing, so I can be aggressive. The set screw made a large burr Check to see how worn the bushing are These need new bushings I’ll…