Lean Machine | Metal and Carbon Fiber 3D Printing for Job Shops

Lean Machine | Metal and Carbon Fiber 3D Printing for Job Shops

One of the big challenges we had with the bending cell was to basically design and integrate everything in a really timely fashion. We were able to actually do it in about six months and that would not have been possible without the additive We found Markforged by researching for the best printers out there…

Full Size E.T. Prop Part 4

Full Size E.T. Prop Part 4

What’s up YouTube its Patrick with NolanC 3D Print Works and this is Part 4 of our full size E.T. Build. So stay tuned and I’ll show you the progress thus far. As you an see from this photo printing for layers 5,6,7 is complete. Once we have these all glued up E.T. Will be…

E.T. Episode 8 Socket To Em!

E.T. Episode 8 Socket To Em!

whats up youtube its part 8 of our full-size GT build in this episode we’re trying to give ET a good set of shoulders to rest his head on so stay tuned well you may have noticed i said trying to give ET some shoulders let’s take a look at the time lapse so you…

Full Size E.T. Prop Part 3

What’s up YouTube its Patrick with NolanC 3D Print Works and this is Part 3 of our full size E.T. Build. So stay tuned and I’ll show you the progress thus far. Intro Might be hard to tell but E.T. Has grown 4 inches since part 2. We are still fighting with rafting even after…