Experimenting with 3D Printed Fabric

Experimenting with 3D Printed Fabric

Cool This video is brought to you by Squarespace the easiest way to make a beautiful professional website visit Squarespace.com/makeanything for 10% off your first purchase What’s up guys? It’s Devin here with make anything and today’s video is a little different from what I tend to do because this project is less about one…

Things you should know about PETG

Things you should know about PETG

PETG or, more widely speaking, the range of copolyesters! It’s like PLA and ABS had a lovechild with all the best bits from either one. Copolyesters have a good mix of properties and has become my personal favorite, but there are some things it can’t do or will need extra tuning for. Let’s go through…

Basics: Cleaning out a clogged nozzle!

Basics: Cleaning out a clogged nozzle!

We’ve all been there: A hotend that just doesn’t seem to let any filament through. While there are a few different things that could cause your printer to behave that way, a clogged nozzle is a likely cause and one that you take care off easily. So today i’ll walk you through how to identify…

Which LAYER HEIGHT gives you the STRONGEST 3D prints?

Which LAYER HEIGHT gives you the STRONGEST 3D prints?

Have you ever asked yourself what influence the layer height you set in your slicer has on the strength of your 3D prints? I’ve printed samples with layers ranging from 0.05mm to 0.4mm and measured their strength on a Universal Test Machine. Which one was the strongest? Let’s find out more! Guten Tag everybody, I’m…